::Our Products
Home > Our Products > Kimray > Automation Systems
Automation Systems
Kimray's approach to automation is to be an integral part of a complete solution for our customers. Fifty plus years of oil & gas production and control experience form the basis for our product design and application. By combining field proven remote terminal units (RTUs) with various modern communications systems, and many different host software options, Kimray offers a complete solution to virtually any automation need.
REMOTE TERMINAL UNITS
Kimray's family of RTUs form the centerpiece of Kimray's automation products. The DACC 3000, 2000, & 500 RTUs all share the same basic microprocessor based design, memory, controls, and operating system. Each model provides different I/O(input/output) interface and communicationsconfigurations.
Features:
Multi--run flow computers for gas and liquid
AGA 3 & 7, 1985 & 1992 standards, NX-19 & AGA 8
API 21.1 compliant custody transfer gas measurement
V-Cone® meter measurement
Digital, multi-variable transmitter interface
Plunger lift control and data logging
Wireless plunger lift well head interface
Complete production control using PROControl
• Condition and/or time based intermit control
• Plunger lift
• Flow control (rate, back pressure, pressure reducing, etc.)
• Volume control
• Sampler and injection control
Multi-drop distributed I/O CIM modules
Production control event storage
Analog history storage
30 second trending of analog values
Complete protocol for remote RTU management
Complete communications capability
Store & forward communications
MDS radio sleep mode support
Cry-out (report-by-exception) communications capability
Efficient protocol for pay-by-the-byte communications
Communications support for various devices
• MODBUS ASCII & RTU, master or remote
* Siemens level probe
• Baker and GRC downhole pressure instrument
• Entronic compressor control system
• Capstone generator
• Various variable speed drives
• Altronic DE-2200 annunciator
• Murphy annunciator
Built in solar charging regulator
Aluminum enclosure
LCD Display
LOS jack (user interface)
DACC 3000 RTU
Single board design
Expansion board available
8 analog in, 4-20mA & 1-5 VDC
2 RTD in, 100 ohm platinum
2 analog out, 4-20mA & 1-5 VDC
8 digital in, contact closure
8 digital out, relay
2 accumulator in, high speed
4 RS-232 ports
MVT & CIM communication support
Modbus master device communications
DACC 2000 RTU
4 analog in, 4-20mA & 1-5 VDC
2 analog out, 4-20mA & 1-5 VDC
4 digital in, contact closure
4 digital out, relay
2 accumulator in, high speed
3 RS-232 ports
1 RS-485 port
MVT & CIM communication support
Modbus master device communications
DACC 500 RTU
2 RS-232 ports
Multivariable transmitter
Digital board (optional)
- 4 digital in, contact closure
- 1 accumulator in, high speed
- 3 digital out (2 relays & 1 open collector)
Analog board (optional)
- 2 analog in, 4-20mA & 1-5 VDC
Optional Enron Modbus protocol
DACC 200 RTU
Used for equipment monitoring
Cryout on alarm
1 RS-232 port
2 analog in, 4-20mA & 1-5 VDC
2 digital in, contact closure
1 accumulator in, high speed
3 digital out, 2 relay, 1 open collector
Firmware interchangeable with I/O CIM
Programming software
AUTOMATED FLOW CONTROL
EPVP
2" & 3" Electro Pneumatic Valve Positioner
Field automation where electrical signals are used to position
valve for on-off or precision flow control.
 Features
Low current consumption
12 or 24 VDC, 225 milliamps max.
1-5 VDC position signal output
Position indicator switches 23 EPVP
Explosion proof design
Integral positioner
Standard Control Signals
12 VDC pulse, 4-20mA or 1-5 VDC analog
EPC
Electro Pneumatic Controller
12 VDC pulse control signal
0-100 psig, 0-30 psig, or 0-15 psig output
Explosion proof, CSA Class 1, Division 1, Group C&D
Features
Adaptable to most industry pneumatic valve positioners
Motor over-travel limit switches
Position switches
Home > Our Products > Kimray >Automation Systems |
